fireNest 6ch remote

Yesterday I finally continued the build of the remote control for fireCrow v2.0. It was quite some time since last I worked with the firing system now so I thought I'd better get cracking!

2013_0313_19524600

The remote control box with buttons, one of the two rotary switches,
a key switch (on the short side beneath the red buttons), and a vinyl sticker

Continue reading

fireCrow v2.0 remote control

Finally I've managed to complete the PCB design for the fireNest v2.0 remote control.
I've been stuck with it for awhile now, projects piled up and I lost the spark!
Today I ordered the PCB's, so now I'm back in business! 😉

fireNest v2.0 PCB design

You can see a sneak peak of the design below:

This is a plug-in card that turns the fireCrow v2.0 into a remote control, the card is designed for an aluminum box that takes a 160x100 mm PCB card.
Continue reading

Larva 2010

More old stuff

Animatronic larva

This little cute creature is made by Peter at Gothenburg Prop Makers. I helped him to make a servo controller board and to program the radio transmitter.

The larva was exposed in the exhibition hall at Gothenburg Film Studios during the Open set 2010.

Here you can see the "making of" video and the larva in action:

The larva was really popular amongst the visitors, probably because they could try to control it by them self.

…and it grew!

I don't remember exactly how we got to the point where we came up with the idea to make it into a modular platform, but it had something to do with the ATtiny4313 I think, sounded like a good idea to make it more versatile!
Why stop at making a wireless firing system, right?! 😉

fireCrow: first draw

The firing system was originally designed for squibs (SFX body hits), so it's very important that the size is as small as possible to be easily concealed under the actor's clothes.

At first we were stuck with the idea of a wireless firing system, but when we found the ATtiny4313 with "a lot" more memory (4K instead of 2K) than the ATtiny2313, we started to fantasize about what could be done with all that space!
Continue reading

coming soon…

fireCrow v2.0 coming soon

The PCB design for fireCrow v2.0 is finished, I'm just going to double check everything twice or more 😉

There also is a 4 channel plug-in card design finished.
The design is especially made after Lennart's, who's working with special effects at the Gothenburg Opera House, desires and needs.
By the way, I'm very happy to have such a great opportunity to work this close to a possible customer!

Preview features on fireCrow v2.0

Continue reading